30kg Capacity Stainless Steel Electronic Platform Weighing Scale
LED Display Electronic Waterproof Scale
RKS226 Series platform weighing scale meets the needs of wet environment and washable compliant. Stainless steel waterproof electronic scales can be used in some places that can touch water, such as food processing workshops, chemical industries, aquatic products markets, etc.
Waterproof Scale Features:
Accuracy: ClassIII
Stainless steel weighing indicator ID226SSII
Stainless steel scale body and open structure
Scale body with electrochemical polishing treatment
Stainless steel and laser welding sealed load cell with IP68/IP69K
Bright and clear LED display,Green or Red are optional
Can be applied in food,medicine and chemical industries
Waterproof Scale Specifications:
| Platform size | Capacity | |||||||
| 3kg | 6kg | 15kg | 30kg | 60kg | 150kg | 300kg | 600kg | |
| 240×300 mm | ● | ● | ● | |||||
| 300×400 mm | ● | ● | ||||||
| 400×500 mm | ● | ● | ● | |||||
| 500×650 mm | ● | ● | ● | |||||
| 600×800 mm | ● | ● | ● | ● | ||||
| Verification division | 1g | 2g | 5g | 10g | 20g | 50g | 100g | 200g |
| Display division | 0.1g | 0.2g | 0.5g | 1g | 2g | 5g | 10g | 20g |
How to install waterproof scale?
Unpacking
Open the packing box, take out the scale body and weighing indicator, and keep the manual, certificate of conformity, warranty card and other materials properly.
Assembly
1)Take out the countertop, place the scale body stably, and adjust the four supporting feet to keep the scale body level.
2)Install the column bracket to the scale body with bolts, and insert the column into the column bracket.
3)Adjust the limit bolts at the four corners to make sure the gap between them and the upper table is 2~3mm.
4)Install the weighing indicator on the column of the scale body, and stuff the excess cables into the column.
5)Pass the loadcell's cable through the column bracket and the column, then tighten the column with bolts (be careful not to damage the cable), and insert the loadcell's cable plug into the socket of the weighing indicator.
6)Cover the weighing platform and power on the weighing indicator.
7)The electronic platform scale has been calibrated in the factory.
Among above points, the third point is most likely to be ignored by customers, and the limit screw is often the main reason for the inaccurate weighing of the new scale for the first time. So please pay attention.