80t Concrete Weighbridge,3*18m Steel Concrete Truck Scale
Remarkable features of reinforced concrete scales:
* Strong corrosion resistance: Concrete can resist chemical corrosion, especially suitable for places with chemical erosion and humid areas of seaside salt fields, and has strong corrosion resistance to salt spray.
* Lightning resistance: Concrete scales (cement scales) are non-conductive, which can effectively prevent lightning strikes and avoid damage to sensors. It is self-evident that the lightning protection ability is better than that of all-steel scales.
* Good long-term working stability: Concrete scale has reasonable structure, heavy weight, accurate positioning, strong rigidity, no deformation, good measurement linearity, and more reliable use.
* High concrete strength and long life: There is no doubt that reinforced concrete has high strength. It has well demonstrated these advantages in the application of bridge technology. The reinforced concrete scale adopts an integral bridge structure, and the surface is wear-resistant, pressure-resistant, acid-resistant, and alkali-resistant. The service life is several times that of ordinary all-steel structure scales.
* The main structure is a carbon steel frame plus an internal steel mesh. After the concrete is poured into the steel mesh, it dries thoroughly to become an anti-corrosion surface
* The transportation cost is lower than that of ordinary carbon steel scales
* On-site pouring requires professional guidance
Product highlights:
* Outstanding anti-corrosion ability, long service life, and eliminates the problem of short service life of steel scales due to corrosion
* Low transportation cost
* Easy debugging and installation
Operation:
* The product cannot be overloaded.
* Maintain good weighing habits when using it. The weighing vehicle maintains a speed of 5 kilometers per hour and weighs evenly. Avoid barbaric behaviors such as rapid weighing and sudden braking, which may lead to inaccurate weighing and affect the service life of the truck scale.
Use environment:
* Since there may be rodent threats in many use occasions, some parts of the electronic platform scale signal line are exposed outside, so rodents must be strictly prevented.
* Ensure a hard and flat cement road surface.
* Do not install the weighing indicator in places with high voltage and strong electronic interference, and do not use it in places with strong electronic interference and strong vibration.
Maintenance:
①When the weighing display controller cannot be used for a long time (such as more than one month), it should be powered on and checked according to environmental conditions to avoid moisture or other bad gas corrosion affecting reliability
②It is prohibited to perform arc welding on the truck scale platform. If arc welding must be performed on the scale platform. Please note: Carefully disconnect the signal cable from the weighing display controller. The ground wire of the arc welding must be set near the welded part and firmly contact the scale body. The sensor must not be used as part of the arc welding.
③Clean up the debris on the sensor frequently and apply butter to the force-bearing steel ball of the sensor regularly to avoid rust or against the sensor, causing inaccurate weighing or jumping.
④ Clean the dirt on the weighing plate frequently, and pay attention to the hard stones on the scale surface when weighing.
⑤ Check whether the limit gap is reasonable frequently, whether the scale body contacts or collides with other objects, etc.
⑥ Check whether the drainage pipe is blocked regularly and maintain good drainage.
⑦ It is forbidden to hit the scale surface with hard objects.
⑧ Do not use flammable materials to clean the instrument. It is strictly forbidden to use strong solvents to clean the instrument.