Aluminium-alloy IP65 Single Point Load Cells, 300kg L6E3 Bench Scales Load Cell
Load Cell Features:
This is Aluminium-alloy IP65 single point load cell
This load cell is colourless anodized
L6E3 load cell is suitable for pricing scales, bench scales, etc
The load cell is applied for maximum platform size: 450 x 450 mm
Load Cell Wiring:
RED: +EXC
BLACK: -EXC
GREEN: +SIGNAL
WHITE: -SIGNAL
BARE: SHIELD
Load Cell Specifications:
| Accuracy class |
| OIML R60 C3 | OIML R60 C4 | OIML R60 C5 |
| Output sensitivity ( = FS ) | mV/V | 2.0 ± 0.2 |
| Maximum capacity ( Emax ) | kg | 50/100/150/200/250/300/400/500 | 300/400/500 |
| Maximum number of load cell intervals ( nLC ) |
| 3000 | 4000 | 5000 |
| Ratio of minimum LC verification interval Y=Emax/vmin |
| 10000 | 15000 | 20000 |
| Combined error | %FS | ± 0.02 | ± 0.0150 | ± 0.01 |
| Minimum dead load | kg | 0 |
|
| Safe overload | %FS | 120 |
|
| Ultimate overload | %FS | 150 |
|
| Zero balance | %FS | ± 2.0 |
|
| Excitation, recommended voltage | V | 5 ~ 12 (DC) |
|
| Excitation maximum | V | 18( DC ) |
|
| Input resistance | Ω | 406 ± 6 |
|
| Output resistance | Ω | 350 ± 3 |
|
| Insulation resistance | MΩ | ≥ 5000 ( 50VDC ) |
|
| Compensated temperature | ℃ | -10~+40 |
|
| Operating temperature | ℃ | -35 ~ +65 |
|
| Storage temperature | ℃ | -40 ~ +70 |
|
| Element material |
| Aluminium |
|
| Recommended torque on fixation | N.m | M6:10 |
|
| Ingress protection (according to EN 60529) |
| IP65 |
|
Caution: cutting cable will affect the full scale output calibration.