D226 indicator is a multifunction weighing indicator with rich options which can be widely used in platform scales, counting weighing, animal weighing, truck scales,etc. Stainless steel housing,high accuracy,stable weighing function enable this unit earn good reputation in global market.
Weighing Indicator Features
* A304 stainless steel case with IP66 protection
* Up to 200,000d(Max. display division)
* 6 bits 33.4mm high, Green or Red LED segment display
* Basic weighing function: ZERO、TARE、CLEAR and PRINT
* Auto Tare, Auto Clear, Auto Print, Print and Accumulation
* X10/Classifying/Counting/Animal weighing
* Over/Under/Ok relay output
* Load cell: (1x analog scale)Max 16 x 350Ω
* 10 status lights
* Modbus-RTU is supported
Hardware Configuration Options:
RS232+RS485X1
RS232+RS485+Relay
RS232+RS485+RTC
RS232+RS485+RTC+Relay
RS232+RS485+LAN
RS232+RS485+WIFI
RS232+RS485+BLUETOOTH
RS232+RS485+LAN+RELAY
RS232+RS485+WIFI+RELAY
RS232+RS485+BLUETOOTH
Weighing Indicator Specificions
Accuracy Class | III |
Increment Size | Two display increment size range |
Display | 6 bits 33.4mm high, Green or red LED display, 10 status lights |
Update Speed | 100ms |
Status Display | Over/Under/OK, Counting, KG/LB, Center of Zero, Net/Gross, Motion, Battery |
5 Function Keys | Tare,Clear,Zero,Function key,Print |
Power On/Off | Support |
Load Cell Number | Max 16 x 350Ω |
Connect Type | 4- wired or 6-wired |
Calibration | 2-point , 3- point , 5-point |
Filter | 3-step |
Scale Process | Tare,Zero,Auto Zero,Motion,Auto Tare,Auto Clear,Auto Print & Accumulation |
Basic Weighing | Tare,Zero,Print,Auto Tare,Auto Clear & Auto Print, Unit switch |
Classify | Over/Under/OK alarm output with relay output |
Support | Counting,Print and Accumulation,Animal weighing |
Serial Port | COM1-RS232,COM2-R485, MODBUS-RTU, continuous output weight, Print barcode weight, Print weighing records, Demand Input/Output, Mettler-Toledo SICS |
TCP/WIFI | Continuous output weight, Demand input/output |
Blue Tooth | Continuous output weight, Demand input/output |
Temperature | -10℃~40℃ , 10%~95％ RH |
Power Supply | 86VAC ~ 220VAC |
Cautions:
Try not use D226 in hazardous areas.
Alway unplug power cord before performing any work on the weighing indicator.