D360 is a high accuracy Industrial Process Weighing Controller. This weighing controller has a variety of field bus communication with high reliability which can fully meet complicated and harsh requirements during industrial weighing control process.
Features:
* 5-step filter, high precision,high anti-vibration
* 3 housing modes: Panel、Harsh、Exd
* Harsh and Exd versions with seven bits 1” high green and red LED display and 10 status lights.
* Panel mount with seven bits 0.56” high green and red LED display and 10 status lights.
* Standard with two serial ports (RS232 and RS232/485), Kinds of field-bus options to connect to PLC or DCS
* Report Weight and rate at the same time from PROFIBUS-DP,MODBUS_RTU,
* 4-20mA, MODBUS-TCP
* 3 kinds PROFIBUS GSD inside
* UDP,TCP,MODBUS-TCP
* No-Testing Weight Calibration is available
* Zone：Zone 2, 22 and Div. 2 location
* Exd Class: EXD IIB T6
Options:
* 8 Inputs /12 Outputs (OC Type)
* 8 Inputs /12 Outputs (Relay Type)
* 4-20mA Output(16-bit DAC) x 1
* 4-20mA Output(16-bit DAC) x 2
* 100M LAN(TCP,UDP,MODBUS-TCP)
* POFIBUS DP for Siemens PLC
* PROFINET for Siemens PLC
* EtherNet/IP for Rockwall PLC
* CC-LINK for Mitsubishi PLC
Specifications:
| Accuracy | |
| Accuracy Class | III |
| EU Approval | 150,000 Display Division ，CMC 6000e |
| Display & Keypad | |
| Display | 7 bits 7-segment green or red LED display， Exd and Harsh：1”high display（25.4mm） Panel： 0.56” high display（14.2mm） |
| Update Speed | 50ms |
| Status Display | Tare，Net，Motion，Center of Zero,Kg/Lb，PLC online/offline |
| Key | 6 function keys（Memory，Tare, Clear，Zero，unit Switch,Print） SS keypad for Exd version |
| Power On/Off | None |
| Keypad Lock | Can be locked via local input or remote communication (MODBUS-RTU,MODBUS-TCP,PROFIBUS-DP, PROFINET, EtherNet/IP, CC-LINK) |
| ADC | |
| Type | 24-bit |
| Speed | 200 Hz |
| Resolution | 0.06uV/d |
| Resolution Approved | 1uV/e（legal for trade） |
| Input | 0.1mV to 19Mv |
| Accuracy | 150,000d |
| Linearity and Stability | |
| In-linearity & TC | ≤0.0015% FS；≤5ppm/℃ |
| Load Cell | |
| Exciting Voltage | 5V DC, max 150mA |
| Load Cell Number | Max 10 x 350Ω or 24 x 1100Ω |
| Connect Type | 4- wired or 6-wired , Cable:274mR/m2 |
| Scale Basic Functionality | |
| Calibration | 2-point with testing weight or no testing(CalFree) |
| Filter | 5-step |
| Scale Process | Tare，Zero，Auto Zero，Motion, Auto Tare, Auto Clear, Auto Print |
| Inputs | Option 8 Inputs，Can be assigned remote inputs for remote host(PLC or DCS) |
| Outputs | Option 12 Outputs，Can be assigned remote outputs for remote host(PLC or DCS) |
| Target Control | |
| OVER/UNDER/OK | Support and other 8 comparators are available |
| Zero Tolerance | Support |
| Target Control | Simple Setpoint or Sequence Control(with Start & Abort command) |
| Communication I/F | |
| Serial Port | 2 ports：COM1-RS232, COM2-RS232/485, MODBUST-RTU, Continuous output weight, Demand Input & Demand Output |
| PROFINET | Connect to Siemens PLC, report integer weight data and Floating weight data |
| EtherNet/IP | Connect to Rockwall PLC, report integer weight data and Floating weight data |
| MODBUS-RTU | Support, Integer & Floating weight data |
| 100M LAN Port | 100M，TCP,UDP,MODBUS-TCP |
| Analog Output | 4-20mA(16-bit DAC) x1 or 4-20mA(16-bit DAC) x2 |
| PROFIBUS-DP | Integer & Floating weight data， 100Hz updating speed, 3 GSD inside，Totally compatible to PANTHER & IND131/331 |
| CC-LINK | for Mitsubishi PLC, Totally compatible to PANTHER & IND131/331 |
| Housing | |
| Panel Mount | IP65，0.56” display |
| Harsh | IP69K, 1”display |
| Exd | IP65, 1”display，Exd ib[ia II C Ga] IIB T6 Gb/DIP A21 TA,T6 |
| DIN Rail | |
| Working Condition | |
| Temperature | -10℃~40℃ ，95％ RH |
| Power Supply | 86~264VAC，12W |