This browser does not support the video element.
Stainless Steel Process Weighing Control Indicator
Mass can be seen everywhere in our life as a basic physical quantity,. There are also many applications in the industrial field that need to weigh materials. Accurate and fast acquisition of weight data is crucial to improving product quality and increasing production efficiency. TA3 series weighing display controller adopts real-time multi-functional microprocessor and high-speed high-precision ADC to achieve accurate and fast weighing. At the same time, the TA3 weighing indicator also provides a variety of control and function interfaces, which is very convenient for on-site control and composition of automatic control systems. Whether it is Simple weighing display or complex process control, TA3 weighing display controller can meet your pursuit to reliable, accurate and efficient weighing performances.
Weighing Control Indicator Features:
* Sharp OLED front panel display with easy 4-button operator interface.
* Indicator mounting options: Panel mount, or with DIN rail mount
* 7-hole drilling pattern for easy panel mounting
* Environmental protection rating IP 65 / Type 4x and 12 (panel display)
* Environmental protection rating IP20/Type 1 (terminal housing)
* Split housing design uses two snap-in tabs for secure & easy disassembly
* 35mm DIN rail mount design for remote mounting
* Safe installation with DIN rail retaining tab
* SD Memory Card slot
* Detachable terminal connectors
Weighing Control Indicator Applications:
* Basic weighing
* Target control
* Checking weight and sorting
* Flow monitoring
* Can replace IND331 indicator completely
Weighing Control Indicator Specifications:
| Housing | DIN type：stainless steel case,with a small display and panel |
| Panel type：stainless steel case,detachable front panel and the body can either be integrally mounted or separately mounted | |
| Outline Size (w×h×d) | DIN：68mm×138mm×111mm |
| Panel：156mm×68mm×108mm | |
| IP rating | DIN：IP20 |
| Panel：IP65 | |
| Power | AC：85~264VAC,49~61Hz |
| DC：18~36VDC | |
| Display | Green OLED display,weight,unit,gross weight/net weight,dynamic state and zero center symbol,etc. |
| DIN：digits of 6mm high | |
| Panel：digits of 14mm high | |
| Keys | 4 keys, C(Clear)、T(Tare)、P(Print)、Z(Zero) |
| Load cell | Excitation voltage is 5VDC |
| Load cell/weighing platform | can connect up to 4pcs load cells with 350ohm(sensitivity of 2mV/V or 3mV/V),or connect 1pc anolog weighing platform. |
| Communication | Serial port |
| Standard：RS-232(COM1),baud rate of 300~115200 | |
| Option: RS-232/485(COM2),baud rate of 300~115200 | |
| Protocol： | |
| Input：ASCⅡcommands CPTZ(Clear,Print,Tare,Zero),COMMAND(give direct inteface command and secondary inteface command) | |
| Output：Continuous output, extended continuous output, command output (limited format) | |
| Serial port | COM1：RS232 |
| Serial port/DIO(option) | COM2：RS232/485,2 input/4 output interface |
| PLC(option) | 4-20mA analog output |
| Profibus DP | |
| ProfiNet | |
| Modbus-TCP | |
| EtherNet/IP | |
| DeviceNet | |
| CC-Link | |
| Minimum sensitivity | 0.6μV/e（OIML） |
| Accuracy | Maximum display division with 100,000d |
| Speed | A/D conversion rate：400Hz |
| Rate of comparison for preset point：50Hz | |
| PLC update：20Hz | |
| Environment | Temperature：-10°~ 40℃ |
| Relative humidity：10%~95%，no condensation |
Weighing Control Indicator Picture: